In this brush sanding machine DT1300-6S, three inner structure can be chosen.
1. Two stations of small rollers+ two stations of disc rollers+ two stations of long drum rollers (if the material has both cross and vertical groove, this structure is recommended)
2. Two stations of disc rollers +four stations of long drum rollers (If the material has mainly vertical groove, this structure is recommended)
3. Four stations of disc rollers+two stations of long drum rollers (If the grooves on the material is complicated, this structure is recommended because disc rollers can sand most area of the material)
| Max Working Width |
1300mm |
| Max Working Thickness |
10-160mm |
| Min Working Length |
≥350mm |
| Roller Speed |
Inverter Control |
| Conveyor Speed |
5-20m/min |
| Long Roller Motor |
1.5KW×2 |
| Conveyor Motor |
1.5KW |
| Lifting Motor |
0.55KW |
| Disc Motor |
1.5KW |
| Disc Swing Motor |
0.55KW |
| Small Roller Motor |
1.5KW*2 |
| Small Roller Swing Motor |
0.55KW |
| Total Power |
10.65KW |
| N. W. |
1900KG |
| Packing Dimension |
3180*2130*2150mm |
| Using Dimension |
3650*2050*2160mm |
1. Do you offer installation?
Our brush sanding machines are almost assembled and adjusted before package. It's very easy to install the machines at your workshop when you receive them. Videos guidance and English manuals can help you in installation easily.
2. Where can we buy the replacement parts?
Most of the parts for brush sanding machines are ready in stock. They can be sent to you directly from our warehouse with cost price.
3. What technical support do you offer?
* Technical support by phone, email, video
* English version video and manual
* Engineer available to service machinery overseas
4. Can you customize the machine for our products?
All brush sanding machines can be customized according to your requirement not only the appearance but also the inner structure.
Audited Supplier 
){kind=link}